Features and Benefits
- Extends and enhances range of WTS devices
- Allows communication around obstacles
- Improves propagation of signal
WTS-AR Wireless Repeater Module
PRICING NOTICE
The pricing listed on our website is only for U.S. buyers and all pricing is subject to change without notice. Any inquiries for products from buyers outside of the U.S. will receive a quote and availability from the licensed distributor nearest your region. These prices will be based on product availability, currency conversions, markets, taxes, shipping costs, as well as local support.
WTS-AR Wireless Repeater Module
Wireless Repeater Module
The WTS- AR Wireless Repeater Module which will allow the WTS telemetry system modules to span around obstacles, increase range and coverage by retransmitting received messages.
The data sent by transmitter modules can be utilized by multiple receivers such as displays, handheld readers, analog outputs, relay modules and computer interfaces. Receivers support common industrial power supplies and are available in robust IP rated enclosures with internal antennas optimized to give outstanding coverage.
The WTS-AR is housed in an IP67 rated enclosure which accepts two D batteries as well as an external power supply. The repeater enables messages to be repeated once so therefore extends the achievable wireless range. Adding further repeaters to the system will increase coverage but will not further increase the range.
Product Downloads
The WTS- AR Wireless Repeater Module which will allow the WTS telemetry system modules to span around obstacles, increase range and coverage by retransmitting received messages.
- Features and Benefits
- Specifications
- Dimensions
- Connector Pin Diagram
- Shipping Information
- Product Video
Specifications
Specifications
U.S. dimensions and capacities are provided for conversion only. Standard products have International System of Units (SI) capacities and dimensions.
Dimensions
Dimensions
U.S. dimensions and capacities are provided for conversion only. Standard products have International System of Units (SI) capacities and dimensions.
Connector Pin Diagram
Connections
Power
Power can be supplied by fitting two D cell alkaline 1.5 V batteries or the module can be supplied from an external 5 Vdc to 18 Vdc source.
In both cases you need to fit the JP1 power jumper to supply power to the module.
When powered from the external DC source the LED will illuminate.
If internal batteries are fitted when external power is applied the batteries will be utilized if external power is lost.
Power Options
The WTS-AR can operate permanently powered or can operate from on-board batteries.
Permanently Powered
This is the simplest way to operate the repeater. With a permanent supply you do not need to worry about the repeater sleeping or waking. You can optionally choose whether the repeater always wakes sleeping modules and then you could utilize the powering up of the repeater to wake up those modules outside the normal radio range.
Battery Powered
In low power battery mode the repeater wakes from sleep when other modules are woken and will remain awake until it stops receiving Stay Awake messages. This will work transparently with most WTS instrumentation.
You just need to decide on the Sleep Delay for a battery powered repeater. This causes the repeater to enter sleep mode if it does not receive stay awake messages within the Sleep Delay time.
Stay awake messages are transmitted by handhelds, analogue output modules and PC software etc. so that when those items are turned off or disabled all other WTS modules will sleep when their Sleep Delay time elapses.
For more information visit Electrical Wiring Diagrams
Additional Information
| Dimensions | 3.30 × 6.50 × 2.20 in |
|---|
Product Video
- Features and Benefits
- Specifications
- Dimensions
- Connector Pin Diagram
- Shipping Information
- Product Video
Features and Benefits
- Extends and enhances range of WTS devices
- Allows communication around obstacles
- Improves propagation of signal
Specifications
Specifications
U.S. dimensions and capacities are provided for conversion only. Standard products have International System of Units (SI) capacities and dimensions.
Dimensions
Dimensions
U.S. dimensions and capacities are provided for conversion only. Standard products have International System of Units (SI) capacities and dimensions.
Connector Pin Diagram
Connections
Power
Power can be supplied by fitting two D cell alkaline 1.5 V batteries or the module can be supplied from an external 5 Vdc to 18 Vdc source.
In both cases you need to fit the JP1 power jumper to supply power to the module.
When powered from the external DC source the LED will illuminate.
If internal batteries are fitted when external power is applied the batteries will be utilized if external power is lost.
Power Options
The WTS-AR can operate permanently powered or can operate from on-board batteries.
Permanently Powered
This is the simplest way to operate the repeater. With a permanent supply you do not need to worry about the repeater sleeping or waking. You can optionally choose whether the repeater always wakes sleeping modules and then you could utilize the powering up of the repeater to wake up those modules outside the normal radio range.
Battery Powered
In low power battery mode the repeater wakes from sleep when other modules are woken and will remain awake until it stops receiving Stay Awake messages. This will work transparently with most WTS instrumentation.
You just need to decide on the Sleep Delay for a battery powered repeater. This causes the repeater to enter sleep mode if it does not receive stay awake messages within the Sleep Delay time.
Stay awake messages are transmitted by handhelds, analogue output modules and PC software etc. so that when those items are turned off or disabled all other WTS modules will sleep when their Sleep Delay time elapses.
For more information visit Electrical Wiring Diagrams
Additional Information
| Dimensions | 3.30 × 6.50 × 2.20 in |
|---|
Product Video
Additional Products
